If you have already plugged in your unit, unplug and try a different outlet. This may reset the standby mode. Add water to the tank and press the ON/Standby button to select a steam setting. If your unit still does not work, call Customer care at 1-800-798-7398.

Why my shark steam mop stopped steaming?

Cut Through Calcium



Over time and use, calcium and mineral deposits may build up in your Shark mop’s nozzle, inhibiting the release of steam. When this happens, Shark recommends cleaning the nozzle to remedy the issue. To get the steam flowing again, grab the nozzle cleaner included with your mop.

How do you reset a steam cleaner?

Unplug and push the reset button. Plug the steamer cord back in again. Check the light.

How do you fix a steam mop that won’t steam?


Quote from video: So if you have a shark steamed up you know you could try all the steps. I took or you could just try getting some CLR. And let it soak. You know pour that solution in there have CLR half water let it

Why has my steam cleaner stopped working?

A common cause to your cleaner not producing steam can be a failed heating element. As the heater is used to heat up the water, if that has ruptured or burnt out your steam cleaner will not produce any steam. With the water tank filled and switched on the steamer should sound like a boiling kettle.

How do you unblock a steam mop?

How to Unclog Steam Mops

  1. Unplug your steam mop and let it cool completely. …
  2. Insert a paperclip into the spray tip opening to remove any possible clog.
  3. Pour vinegar through the mop head to clear any clogs located there.
  4. Reassemble your steam mop and fill the reservoir with water before attempting to use it again.


Can you put vinegar in a steam mop?

Floor steam cleaning mops use steam to clean hardwood, tile and linoleum flooring. Usually, you mix a small amount of soap with water and pour it into the mop. This provides adequate cleaning. However, you can add vinegar to the mixture and enhance the cleaning power of the mop.

How long does it take for shark steam mop to heat up?

approximately 30 seconds

1 Attach a clean Dirt Grip pad to the Genius Mop Head. 2 Plug into an electrical outlet. The blue light will illuminate. It takes approximately 30 seconds for the mop to heat up and the steam to be ready.